⟁ Montana Well Data field records · 2026 survey

Montana Well Data › Broadwater County › Three Forks (59752)

Three Forks, MT (59752): well depth, water level & drilling cost

✓ 1,786 GWIC records · Broadwater County

140 ftmedian well depth
60 ft–240 fttypical depth range
44 ftmedian static water level
30 gpmmedian yield (1,535 tests)

Pull every recorded well near a Three Forks (59752) address — $49

How deep are wells in and around Three Forks (59752), Montana?

The median drilled well depth in and around Three Forks (59752) is 140 ft, based on 1,751 wells with recorded depths in the state GWIC database. Half fall between 60 ft and 240 ft; 90% are shallower than 347 ft.

How much does it cost to drill a well in and around Three Forks (59752)?

Applying published per-foot rates to the local median depth of 200 ft: drilling and casing alone typically runs $5,000–$13,000; a complete system including pump, pressure tank, and hookup typically runs $12,000–$20,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Three Forks (59752)?

The median static water level is 44 ft below ground surface (middle half of wells: 10 ft–87 ft), from 1,607 measurements.

Drilled depth distribution

0–50 ft 375 50–100 ft 259 100–150 ft 286 150–200 ft 206 200–300 ft 361 300–400 ft 124 400–600 ft 100 600+ ft 40
Looking at a specific property in Three Forks (59752)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Three Forks (59752)

Free. Goes to licensed drillers working Broadwater County.

Part of Broadwater County well records.

Method: medians computed from GWIC records (site type WELL, non-abandoned; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.