Montana Well Data › Meagher County › White Sulphur Springs (59645)
White Sulphur Springs, MT (59645): well depth, water level & drilling cost
✓ 572 GWIC records · Meagher County
Pull every recorded well near a White Sulphur Springs (59645) address — $49
How deep are wells in and around White Sulphur Springs (59645), Montana?
The median drilled well depth in and around White Sulphur Springs (59645) is 100 ft, based on 556 wells with recorded depths in the state GWIC database. Half fall between 50 ft and 165 ft; 90% are shallower than 255 ft.
How much does it cost to drill a well in and around White Sulphur Springs (59645)?
Applying published per-foot rates to the local median depth of 100 ft: drilling and casing alone typically runs $2,500–$6,500; a complete system including pump, pressure tank, and hookup typically runs $6,000–$10,000. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in and around White Sulphur Springs (59645)?
The median static water level is 30 ft below ground surface (middle half of wells: 13 ft–56 ft), from 535 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Meagher County.
Part of Meagher County well records.
Method: medians computed from GWIC records (site type WELL, non-abandoned; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.