⟁ Montana Well Data field records · 2026 survey

Montana Well Data › Custer County › Volborg (59351)

Volborg, MT (59351): well depth, water level & drilling cost

✓ 515 GWIC records · Custer County

140 ftmedian well depth
80 ft–240 fttypical depth range
65 ftmedian static water level
10 gpmmedian yield (440 tests)

Pull every recorded well near a Volborg (59351) address — $49

How deep are wells in and around Volborg (59351), Montana?

The median drilled well depth in and around Volborg (59351) is 140 ft, based on 484 wells with recorded depths in the state GWIC database. Half fall between 80 ft and 240 ft; 90% are shallower than 377 ft.

How much does it cost to drill a well in and around Volborg (59351)?

Applying published per-foot rates to the local median depth of 140 ft: drilling and casing alone typically runs $3,500–$9,100; a complete system including pump, pressure tank, and hookup typically runs $8,400–$14,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Volborg (59351)?

The median static water level is 65 ft below ground surface (middle half of wells: 25 ft–133 ft), from 442 measurements.

Drilled depth distribution

0–50 ft 74 50–100 ft 80 100–150 ft 99 150–200 ft 61 200–300 ft 88 300–400 ft 35 400–600 ft 28 600+ ft 19
Looking at a specific property in Volborg (59351)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Volborg (59351)

Free. Goes to licensed drillers working Custer County.

Part of Custer County well records.

Method: medians computed from GWIC records (site type WELL, non-abandoned; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.