⟁ Montana Well Data field records · 2026 survey

Montana Well Data › Garfield County › Sand Springs (59077)

Sand Springs, MT (59077): well depth, water level & drilling cost

✓ 278 GWIC records · Garfield County

176 ftmedian well depth
100 ft–276 fttypical depth range
96 ftmedian static water level
10 gpmmedian yield (251 tests)

Pull every recorded well near a Sand Springs (59077) address — $49

How deep are wells in and around Sand Springs (59077), Montana?

The median drilled well depth in and around Sand Springs (59077) is 176 ft, based on 268 wells with recorded depths in the state GWIC database. Half fall between 100 ft and 276 ft; 90% are shallower than 380 ft.

How much does it cost to drill a well in and around Sand Springs (59077)?

Applying published per-foot rates to the local median depth of 176 ft: drilling and casing alone typically runs $4,400–$11,440; a complete system including pump, pressure tank, and hookup typically runs $10,560–$17,600. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Sand Springs (59077)?

The median static water level is 96 ft below ground surface (middle half of wells: 45 ft–165 ft), from 207 measurements.

Drilled depth distribution

0–50 ft 33 50–100 ft 26 100–150 ft 58 150–200 ft 29 200–300 ft 65 300–400 ft 32 400–600 ft 20 600+ ft 5
Looking at a specific property in Sand Springs (59077)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Sand Springs (59077)

Free. Goes to licensed drillers working Garfield County.

Part of Garfield County well records.

Method: medians computed from GWIC records (site type WELL, non-abandoned; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.