⟁ Montana Well Data field records · 2026 survey

Montana Well Data › Park County › Emigrant (59027)

Emigrant, MT (59027): well depth, water level & drilling cost

✓ 655 GWIC records · Park County

158 ftmedian well depth
80 ft–280 fttypical depth range
52 ftmedian static water level
20 gpmmedian yield (605 tests)

Pull every recorded well near a Emigrant (59027) address — $49

How deep are wells in and around Emigrant (59027), Montana?

The median drilled well depth in and around Emigrant (59027) is 158 ft, based on 643 wells with recorded depths in the state GWIC database. Half fall between 80 ft and 280 ft; 90% are shallower than 405 ft.

How much does it cost to drill a well in and around Emigrant (59027)?

Applying published per-foot rates to the local median depth of 158 ft: drilling and casing alone typically runs $3,950–$10,270; a complete system including pump, pressure tank, and hookup typically runs $9,480–$15,800. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Emigrant (59027)?

The median static water level is 52 ft below ground surface (middle half of wells: 27 ft–98 ft), from 575 measurements.

Drilled depth distribution

0–50 ft 51 50–100 ft 160 100–150 ft 103 150–200 ft 69 200–300 ft 111 300–400 ft 72 400–600 ft 56 600+ ft 21
Looking at a specific property in Emigrant (59027)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Emigrant (59027)

Free. Goes to licensed drillers working Park County.

Part of Park County well records.

Method: medians computed from GWIC records (site type WELL, non-abandoned; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.