⟁ Montana Well Data field records · 2026 survey

Montana Well Data › Fallon County

Fallon County, Montana: well depth, water level & drilling cost

✓ 1,852 GWIC records · verified 2026-10-02

180 ftmedian well depth
80 ft–400 fttypical depth range
68 ftmedian static water level
10 gpmmedian yield (1,464 tests)

Pull every recorded well near a Fallon County address — $49

How deep are wells in Fallon County, Montana?

The median drilled well depth in Fallon County is 180 ft, based on 1,774 wells with recorded depths in the state GWIC database. Half of all wells fall between 80 ft and 400 ft; 90% are shallower than 800 ft. Wells drilled since 2016 have a median depth of 160 ft.

How much does it cost to drill a well in Fallon County?

Applying published per-foot rates to the local median depth of 180 ft: drilling and casing alone typically runs $4,500–$11,700; a complete system including pump, pressure tank, and hookup typically runs $10,800–$18,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in Fallon County?

The median static water level is 68 ft below ground surface (middle half of wells: 30 ft–120 ft), from 1,283 measurements.

How much water do wells in Fallon County produce?

The median tested yield is 10 gpm (middle half: 5 gpm–15 gpm), from 1,464 pump tests. A typical household needs 5–10 gpm.

Drilled depth distribution

0–50 ft 289 50–100 ft 199 100–150 ft 245 150–200 ft 206 200–300 ft 245 300–400 ft 133 400–600 ft 135 600+ ft 322

Who drills wells in Fallon County?

Companies by number of wells completed in this county since 2016, per filed well logs.

DrillerWells since 2016
ASKIN DRILLING81
HIGGINS DRILLING COMPANY40
HAZ TECH DRILLING INC16
MONTANA SALINITY CONTROL ASSOCIATION16
HANSEN ENVIRONMENTAL DRILLING9
JERRY'S SERVICES9
H & H DRILLING6
SHARP DRILLING INC4

See every driller with wells on record in Fallon County, ranked →

Get quotes from local drillers

Looking at a specific property in Fallon County?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers active in Fallon County

Free. Goes to licensed drillers working Fallon County.

Well records by ZIP code in Fallon County

Median depth, water level, and yield for each ZIP code with recorded wells.

Method: medians computed from GWIC records (site type WELL, non-abandoned; depths 0–5,000 ft). Cost estimate applies published per-foot ranges (checked 2026-06-11) to the local median depth — full methodology & sources.