⟁ Montana Well Data field records · 2026 survey

Montana Well Data › Cascade County

Cascade County, Montana: well depth, water level & drilling cost

✓ 7,186 GWIC records · verified 2026-10-02

111 ftmedian well depth
38 ft–245 fttypical depth range
35 ftmedian static water level
22 gpmmedian yield (5,594 tests)

Pull every recorded well near a Cascade County address — $49

How deep are wells in Cascade County, Montana?

The median drilled well depth in Cascade County is 111 ft, based on 7,041 wells with recorded depths in the state GWIC database. Half of all wells fall between 38 ft and 245 ft; 90% are shallower than 460 ft. Wells drilled since 2016 have a median depth of 190 ft.

How much does it cost to drill a well in Cascade County?

Applying published per-foot rates to the local median depth of 190 ft: drilling and casing alone typically runs $4,750–$12,350; a complete system including pump, pressure tank, and hookup typically runs $11,400–$19,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in Cascade County?

The median static water level is 35 ft below ground surface (middle half of wells: 15 ft–102 ft), from 5,939 measurements.

How much water do wells in Cascade County produce?

The median tested yield is 22 gpm (middle half: 10 gpm–40 gpm), from 5,594 pump tests. A typical household needs 5–10 gpm.

Drilled depth distribution

0–50 ft 2,053 50–100 ft 1,183 100–150 ft 873 150–200 ft 669 200–300 ft 747 300–400 ft 494 400–600 ft 670 600+ ft 352

Who drills wells in Cascade County?

Companies by number of wells completed in this county since 2016, per filed well logs.

DrillerWells since 2016
AQUASOURCE DRILLING LLC349
BOLAND DRILLING262
AAAA WATER WELL DRILLING INC154
CASCADE DRILLING LP96
MONTANA SALINITY CONTROL ASSOCIATION70
PAT BYRNE DRILLING INC65
AQUASOURCE INC LLC61
WESTERN WATER WELLS51

See every driller with wells on record in Cascade County, ranked →

Get quotes from local drillers

Looking at a specific property in Cascade County?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers active in Cascade County

Free. Goes to licensed drillers working Cascade County.

Well records by ZIP code in Cascade County

Median depth, water level, and yield for each ZIP code with recorded wells.

Method: medians computed from GWIC records (site type WELL, non-abandoned; depths 0–5,000 ft). Cost estimate applies published per-foot ranges (checked 2026-06-11) to the local median depth — full methodology & sources.